LINCOLN CONTINENTAL WIPER MOTOR (DOES NOT FIT MARK III) 1966-69

The long awaited and much needed Clean Wipe wiper drive for the 1966-69 Lincoln Continentals is finally here.  After lots of development and engineering we have managed to design a kit that will allow you to eliminate the stock hydraulic wiper motor and replace it with a 12-volt heavy duty electric motor.  Kiss all those hydraulic power steering hoses good bye and make room for your engine swap.  Ford did not give us much room to work with but the motor will fit in the original cavity area under the fresh air grill.  Only minor trimming or relieving of surrounding sheet metal will be necessary for the larger electric motor.   The standard kit comes with a 2-speed self parking motor, switch, wiring harness, drive arm, all necessary mounting hardware, and installation instructions.  You can upgrade to either the 2-speed washer switch or the intermittent delay switch for an upgrade price.  You will only receive one switch with the kit based on what switch you choose.  Or switch can even be mounted in the stock location in the dash with the use of our shaft extension.  And you will be able to retain the stock look with the stock knob and bezel fitting on as well. NOTE: DOES NOT FIT MARK III MODEL. Also available (add on) is wiper blades and arms & switches - Blades come in several sizes. 6, 8, 10, 12, 13 or 15 inches.  - Arms Polished stainless 5/8" knurl (right and or left). Or Polished Stainless adjustable fits 1/2" knurl. - Switches Intermittent delay wiper switch